Message "change oil" - reser

Martin_CZ · Beitrag von **Martin_CZ** » Dienstag 1. Mai 2007, 21:03

Hello,
the time has come to change the oil in my Bulldog. A Yamaha service made the operation and they told me that there is an "oil-counter" installed which can only be reset when it is on. But - at the time when my Bulldog was in service, it was not on yet.

Today when I drove, I received message on the display "CHnGE OIL"..... But it's already been changed.

Is it possible to reset the counter by myself, or shall I go to service again? Thanks for tips.

Martin

Mick P · Beitrag von **Mick P** » Dienstag 1. Mai 2007, 21:43

Hi Martin

If your Dog is 2001-2004 hold down both buttons (odometer SET/RESET) on your instrument console as you switch on the ignition, this should reset it.

Mick P

Axman · Beitrag von **Axman** » Mittwoch 2. Mai 2007, 08:21

Good morning,

sorry Mick. but what you described resets the clock..

To reset "change oil" you do the following : turn the ignition-key to "off" then press the reset-button (the lower one)... keeping the button depressed turn the ignition to "on" and voila´...no more "change oil"

greets

Axman

Mick P · Beitrag von **Mick P** » Freitag 4. Mai 2007, 01:31

Yes Sorry about that miss read the instructions

Not only do i have trouble reading german but i am also having trouble with my english

Regards Mick

Martin_CZ · Beitrag von **Martin_CZ** » Samstag 5. Mai 2007, 09:02

Mick & Axman - thanks a lot! I have tried all possible "CTRL-ALT-DEL" on the set/reset buttons, I've erased clock, km-counters but the message was still there

So thanks for the advice. By the way, where did you find it? It is not in the 350-page service manual. Perhaps in the user manual which I have for the bike?

Martin

Mick P · Beitrag von **Mick P** » Samstag 5. Mai 2007, 17:53

Hi Martin

Owners manual 5JN-F8199-A0

English section

Instruments and control functions (section 3)

page 3-4 3-5

Hope this helps